It's True.
No Grit.
With Pre-Prime 167 Sealer, millions of square feet of concrete
and rusty steel have been upgraded without blasting.
Pre-Prime 167 100% Solids Rust Penetrating
Sealer works where other solvent-based surface
tolerant coatings can't—on rusty steel, concrete,
and many aged coatings systems.
Pre-Prime 167 Sealer is water thin. Its
low viscosity maximizes penetration,
wetting, and capillary action. One thin wet
coat at 1.5 mils (38 microns) will seep deep
into tight rust and wick beneath.
Water-thin viscosity allows it to wet deep
into and behind rust; 100% solids deters
trapped solvents. It makes hand-cleaned
steel into a stable surface ready for coating,
providing a cost effective alternative to
maintenance blasting.
Pre-Prime 167 Sealer primes and protects
concrete. Its water-like viscosity allows it
to penetrate deep into the porous concrete
surface. It becomes an integral part of the
concrete, seals the surface, and forms a strong
foundation for overcoating. Used alone, Pre-
Prime 167 Sealer strengthens and seals the
concrete, and with the proper top coat,
provides resistance to water, oil, gasoline,
diesel, and mild chemical exposures.
On aged coatings, Pre-Prime 167 Sealer
seals loose edges, crevices, back-to-back
angles, and surface imperfections. The low
film build eliminates the risk of applying
excessively thick films over aged coatings,
alleviating shrinkage and curing stresses,
and deterring delamination.
For ballast tanks in marine applications,
a high pressure water wash followed by
Pre-Prime 167 Sealer and a coat of Devran
230® High Build Epoxy Coating or Bar-
Rust 235™ Multi-Purpose Epoxy Coating
provides superior corrosion protection and
chemical resistance.
Your Devoe Coatings Representative can recommend the surface
preparation and system that is best for you.
Since 1754 DEVOE
COATINGS
Marine Industrial Offshore
A Division of Grow Group, Inc.
Circle 239 on Reader Service Card
Digital Wave Publishing