Maritime Reporter, December 1991

<BODY> <div> of major advantages to the builder and the operator. One advantage for the builder being that since there are no inter- sections between the transverse and longitudinal members, a great deal of automated welding can be used and welds mechanically checked. For the owner, the Epoch Mark II design offers cargo flexibility, the eligibility of trading to the U.S., and improved maintenance, since her tanks have a flush interior. The Salamina has an overall length of 600 feet, breadth of 105 feet, and design draft of 36 feet. She is powered by a single Hitachi Zosen- MAN B&W slow-speed 6S50MC die- sel engine with a maximum con- tinuous output of 9,200 hp at 106 rpm, producing a maximum trial speed of just over 15 knots. SOLIDARNOSC Burmeister & Wain Circle 79 on Reader Service Card The first of a series of six Panamax bulk carriers, Solidarnosc, for the Polish Steamship Company was delivered by Danish builder Burmeister & Wain (B&W) during the past year. Based on B&W's BCT70 design, the Solidarnosc has a length of 750 feet, molded breadth of 106 feet, and design draft of 41 feet. Propulsion is provided by one MAN-B&W cross- head diesel engine of the five-cylin- der, direct-reversible, single-acting, two-stroke, constant-pressure tur- bocharged 5S60MC, achieving a speed of 15.2 knots when the main engine is developing 9,800 bhp. Aux- iliary engines consist of three die- sels, type MAN-B&W 5L23/30 or equivalent, each directly coupled to an alternator, 550 kw, 720 rpm, 3 by 440 V, 60 Hz. There is also an emergency diesel generator of ap- proximately 100 kw. The BCT70 is a flexible type and can be delivered either as bulk car- rier, product carrier or OBO-car- rier. The vessel's design is such that the owner can postpone the decision as to whether it should be bulk car- rier or OBO-carrier until the con- struction stage is reached when spe- cialized equipment—auxiliary en- gines, pumps, etc.—must be ordered. It is a double hull vessel with all structural reinforcement between the inner and outer hull. As a conse- quence, the holds are completely free of sharp edges and, therefore, easy to clean and maintain. USNS THOMPSON Trinity Marine Group Circle 77 on Reader Service Card The first Navy oceanographic ship of a Halter Marine design, the Tho- mas G. Thompson (AGOR-23), was delivered during the past year, Trin- ity Industries, Inc.'s Halter Marine, Inc., New Orleans, La. Operated by the University of Washington under the University National Oceano- graphic Laboratory System (UNOLS) sponsored by the office of the Chief of Naval Research, U.S. Navy, the Thompson serves as a general purpose, all-season, oceano- graphic ship in coastal and deep ocean waters. Typical scientific missions will include physical, chemical and bio- logical oceanography, multi-disci- pline environmental investigations, ocean engineering, marine acous- tics, marine geology and geophysics, and survey tasks such as bathym- etry and magnetometry. Based on a Halter design selected in national competition, the AGOR- 23 has a diesel electric propulsion system with three 715-kw and three 1,500-kw diesel generators inte- grated to provide power for propul- sion and ship service electrical sys- tems. The propulsion package con- sists of three Caterpillar diesels with KATO generators and GE propul- sion motors. The ship is equipped with a dy- namic positioning system which pro- vides automated precision track-line and station-keeping capability. The system uses data from a global posi- tioning system, an acoustic vertical reference system, the gyrocompass, and a wind sensor system to control the ship. The Thomas G. Thompson is 274 feet in length, with a 52.5-foot beam, and a 18.5-foot draft. Full load dis- placement is 3,250 tons. USNS VICTORIOUS McDermott Shipyards Circle 89 on Reader Service Card The first of a new class of Navy SWATH ocean surveillance ships, the 232-foot USNS Victorious (T- AGOS-19) emerged from McDermott's Morgan City, La., ship- yard. With a wide open deck mounted 25 feet above the water on twin hulls, the Navy's first in-ser- vice SWATH (Small Waterplane Area Twin-Hulled) vessel is uncom- mon in appearance but refined in its unique abilities. The Victorious has a 94-foot beam and a 24-foot 9-inch draft. The small waterplane design, with its reduced buoyant forces in the area if wave action, was chosen specifically for its ability to provide a smooth ride in high sea states. Among the additional benefits to the SWATH design is a large main deck area suitable for multiple ap- plications. The 3,380-long-ton Victorious is diesel-electric powered with the main gensets, consisting of four Cat- erpillar 3512 diesel with Kato gen- erators, located in the upper hull. GE electric propulsion motors, rated at 1,600 shp, drive five-bladed pro- pellers at the stern of each lower hull. Lister Chain & Forge supplied the vessel's anchor chain. HITACHI ZOSEN DELIVERS A NEW ERA IN PRODUCT OIL CARRIER DESIGN. Announcing delivery of the first of the EPOCH MARK II series. Hitachi Zosen has delivered the first ship in their EPOCH MARK II series, in addition to having three more ships currently under construction. All four ships utilize Hitachi Zosen's revolutionary EPOCH MARK II concept, which incorporates a unique unidirectional girder system combined with a complete double hull structure. While a ship's hull is customarily designed with a grillage of longitudinal and transverse members for strength, this system uses only longitudinal members in a double hull to provide sufficient strength. This unidirectional girder system results in unprecedented structural simplicity and completely flush surfaced cargo tank interior. MARK II product oil carriers provide unrivaled advantages in performance over more conventional designs. The EPOCH MARK II series is available in 40 and 60 thousand dwt designs and Hitachi Zosen has obtained many patents worldwide. The Superior Performance of the EPOCH MARK n Series: Tank configuration Cargo/ballast segregation Unloading efficiency Cargo tank cleaning Cargo tank heating cargo tank coating hull construction stranding & collision Conventional n • 1 u U Excellent **: Good *: Normal llh Anniversary ol crealtvity and progress We build industries Hitachi Zosen HITACHI ZOSEN CORPORATION HITACHI ZOSEN EUROPE LTD.: London: Winchester House, 77 London Wall, London EC2N 1BX, England Phone: 071-628-3891/8 Telex: 887873, 884009 HITACHI ZOSEN U.S.A. LTD.: New York: 150 East 52nd Street, 20th floor, New York, NY 10022, U.S.A. Phone: 212-355-5650 Telex: 232036 HITACHI ZOSEN CORPORATION: Tokyo: 1-1-1 Hitotsubashi, Chiyoda-ku, Tokyo 100, Japan Phone: 03-3213-6611 Telex: J24490 OVERSEAS OFFICES & SUBSIDIARIES: Dusseldorf: Graf-Adolf-Strasse 24, D-4000 Diisseldorl 1, Germany Phone: 0211 -133011 /4 Telex: 8587231 Beijing: Room No. 1201, Beijing Fortune Building, 5, Dong San Huan Bei Lu, Chao Yang Qu, Beijing 100004, The People's Republic of China Phone: 01-501-4315/4316 Telex: 210510 Jakarta: Wisma Antara, 14th floor, Jalan Medan Merdeka Selatan 17, Jakarta, Indonesia Phone: 021-345948,345943 Telex: 44496 Hitachi Zosen Clearing Inc.: 6499 West 65th Street, Chicago, Illinois 60638, U.S.A. Phone: 708-767-8700 Telex: 254781 Hitachi Zosen Singapore (Pte.) Ltd.: No. 15, Benoi Road, Singapore 2262, Singapore Phone: 8616622/3 Telex: RS21213, RS21906 Hitachi Zosen Engineering Singapore (Pte.) Ltd.: UOB Building, 325 Boon Lay Place, Jurong, Singapore 2264, Singapore Phone: 2641344 Telex: RS21999 Hitachi Zosen Comnany (HK) Limited: Room No. 1009, Tak Shing House, 20 Des Voeux Road, Central, Hong Kong Phone: 5-220597, 5-246237 Telex: 73648 _ . .... Circle 270 on Reader Service Card December, 1991 43 </div> <span id="lblContents"></span> <br /> <br /> <a href="http://www.digitalwavepublishing.com/" title="Digital Magazine">Digital Wave Publishing</a> </BODY>