New Line Of Kinetic Converters
From Omnithruster
For Thruster Applications
Omnithruster has designed and
developed a new series of kinetic
converters (those devices associated
with its marine maneuvering de-
vices that convert mechanical en-
ergy to hydraulic fluid energy).
This new series of devices has
been designed from the ground up to
exhibit special characteristics nec-
essary to develop maximum thrust
for a given horsepower input to maxi-
mize efficiency and performance in
marine jet-powered thrusters and
propulsion systems.
Some of the features embodied in
the new Gamma I design are: stain-
less steel specially finished impel-
lers to give high efficiency and low
cavitation parameters; extra
strength welded metal casings and
diffuser sections; optional stainless
steel wearing rings and the impeller
seats; easily-replaceable impellers
by means of two-part intake sec-
tions.
The machines are so designed that
the operating characteristics enable
a soft start with an AC motor with
minimum in rush current demand.
Especially applied finish is used on
the surface in contact with seawa-
ter; utilized in vessels from small
workboats and tugboats with 75
horsepower installations to large
displacement vessels, naval, cruise
ships, containerships, and tanker
installations with up to 3,000 and
4,000 horsepower. The units also
use newly designed control systems.
Omnithruster RPV 575-A Gamma series rated at
250 hp DC motor drive, Canadian Coast Guard,
Navaids vessel Provo Wallis.
These new Gamma series sys-
tems are being manufactured from
American-made materials at the
Omnithruster facility in Santa Fe
Springs, Los Angeles County, Calif.
For more information,
Circle 31 on Reader Service Card
GE General Services
Awarded Contract Worth
$8.4 Million By Navy
GE Government Services, Inc.,
General Electric Co., Cherry Hill,
N.J., was awarded an $8.4 million
cost-plus-fixed-fee Navy contract.
$140.6 Million Contract
Signed For Multipurpose
Icebreaker For Finland
The Hollming Oy-Rauma Yards
Oy consortium recently signed a con-
tract to build a multipurpose ice-
breaker for Finnish National Board
of Navigation. The vessel is to be
delivered in March 1993.
The value of the order, including
the cost of financing, is around FIM
580 million (about $140.65 million).
In addition to icebreaking, this
new generation icebreaker is in-
tended for a range of summer duties
in offshore oil and gas fields. The
consortium will design and build
the vessel using a basic concept de-
veloped by the Finnish National
Board of Navigation and ILS Engi-
neering Consultants. The hull con-
cept is designed for icebreaking, yet
at the same time will provide the
seagoing characteristics of an off-
shore vessel. The result is an ocean-
going icebreaker.
One important feature of the
multipurpose icebreaker is its large
open afterdeck, which can be fitted
Finneran Appointed
President Of CIRM
Thomas J. Finneran, executive
vice president of Mackay Communi-
cations, In.c, has been appointed
president of The Comite Interna-
tional Radio Maritime (CIRM).
CIRM ia a private organization
based in London and composed of
leading international marine equip-
with various types of equipment for
operations during summer. The
afterdeck is strengthened to carry
equipment for laying and repairing
flexible cables and for handling an-
chors and various cargoes.
The vessel will have a length over-
all of about 337.3 feet, a beam of 85.3
feet and a height from side to top
deck of 41 feet. The design draft will
be approximately 22.9 feet in winter
work on the Baltic and 27.5 feet in
summer offshore operations. The
vessel's deadweight will be 1,700
tons in winter and 4,500 tons in
summer.
The propulsion system will be
diesel-electric, featuring two
Aquamaster-Rauma Oy stern pro-
peller units, shaft power 2x7.5 MW.
The Aquamaster system will develop
a bollard pull of 200 tons and pro-
vide the vessel with excellent steer-
ing characteristics both in ice and in
open water. For offshore work the
vessel will be fitted with three trans-
verse bow thrusters and a dynamic
positioning system.
For free literature on the facili-
ties and capabilities of Hollming Oy-
Rauma Yards Oy,
Circle 12 on Reader Service Card
ment manufacturers. The bylaws of
CIRM preclude any government
agency from being a member, but
allow their participation in CIRM
meetings and conventions of perti-
nent international organizations
including IMO where they assist in
avoiding the adoption of regulations
that are technically impractical.
CIRM meets twice a year, usually in
Europe, and holds working group
meetings in London.
CALL TOLL FREE
1-800-752-7595
leffler
CORPORATION
201 East Lincoln Hwy, Penndel, PA 19047-4097
CALL 215-757-2404 • FAX 215-757-7105
U.S. Navy Ships...
have been fitted with Loeffler deck
drains, valves, and bells for almost 40
years. They are precision made
^ftgOOL—to the latest applicable
• N NAVSEA. BUSHIPS.
. ~ i) or MIL standard.
1 you are building
you need Loeffler.
Circle 230 on Reader Service Card
December, 1991
Circle 222 on Reader Service Card
35
•ELECTRICAL SHIPBOARD CABLES
PORTABLE CORDS & POWER CABLES
•INDUSTRIAL CABLES & BUILDING
WIRE *WELDING & MINING CABLES
•CONTROL & SIGNAL CABLES
•COMMUNICATION, ELECTRONIC
& COAXIAL CABLES
More Than 40 Years Of Dependable Service!
L.F. GAUBERT & CO. INC.
P.O. BOX 50500
NEW ORLEANS, LA. 70150 (504) 822-7272
Digital Wave Publishing