The Tristan, first of four huge car/truck
by Kockums.
Kockums Deliv
Carrier To W
The first of four huge car and
truck carriers ordered by Wallenius
Lines for 1985 delivery from Swed-
ish and Japanese shipyards was de-
livered recently by Kockums of
Malmo. Named Tristan, following
the owner's tradition of naming ves-
sels after famous operas, the new
carrier is almost identical to the last
ship of the Madame Butterfly Class,
which was delivered to Wallenius by
Kockums in 1981-82.
Tristan has a capacity of 6,230
passenger cars or a combination of
2,930 cars and 540 heavy vehicles.
She has an overall length of 649.6
feet, beam of 105.9 feet, depth to
weather deck of 103.35 feet, and
scantling draft of 37.7 feet. Dead-
weight on maximum draft is 28,070
metric tons. There are 13 decks,
four of which are hoistable, provid-
ing a total parking area of 53,140
square meters.
The vessel is built to the highest
class of Lloyd's Register of Ship-
ping, + 100 Al, +LMC, UMS, Ice
Class 3, Vehicle Carrier.
The main engine is the latest
model Sulzer type 7 RTA 68 with an
output of 18,400 bhp, with constant-
pressure supercharging and the
power output optimized for mini-
mum fuel consumption. The propul-
sion machinery is direct-reversible
and connected to a fixed propeller,
and is remote-operated from the
bridge or the engine control room.
Service speed is 20 knots.
Electrical power is supplied by
three Wartsila-Vasa diesel engines,
each driving a 2,000-kva alternator,
all installed in a separate generator
room. Tristan is a unifuel ship, with
main and auxiliary engines all burn-
Red Fox Negotiating
Licensing Agreement
With John G. Kincaid
Scottish marine engineers John
G. Kincaid is negotiating a licensing
agreement with Red Fox Inc. of New
Iberia, La. to produce the U.S. com-
pany's range of effluent treatment
equipment for offshore oil and other
marine installations.
The license, which would give
Kincaid the U.K. manufacturing
rights for a one-off payment, was
s ordered by Wallenius Lines, being delivered
irs Big Vehicle
tllenius Lines
ing the same type of heavy fuel oil,
up to 600 cSt.
Heavy vehicles are loaded on the
4th, 6th, and 9th decks, which are
reinforced to carry heavy loads. The
5th, 7th, 10th, and part of the 8th
decks are divided into hoistable sec-
tions, which allow vehicle heights of
up to 20 feet 4 inches.
The 6th deck is normally the car
entrance deck, but at higher berths
the middle outside ramp may also
be attached to deck No. 7. The two
outside loading ramps are posi-
tioned at the starboard side; the aft
one will be rigged with 25-degree aft
angle to provide loading of long
vehicles. Internal ramp systems be-
tween decks to doors and to open-
ings in transverse bulkheads make it
possible to load/discharge the entire
ship via one of the outside ramps.
Distributed along the entire
length of the ship are 53 fans that
have the capacity to change the hold
air volume 25/50 times per hour.
They are operated in sections or
individualy from a separate control
room on the upper deck, from which
ballast pumps and valves are also
manipulated.
All navigational equipment is of
the latest design. The radar unit has
anti-collision computer, with free
choice of picture presentation and
other possibilities. The autopilot is
a totally self-adaptive, fuel-saving
type with set radius steering for
turns. Ship's position is indicated by
a Navstar unit (Decca Navigator) as
well as a Magnavox satellite receiv-
er. Speed log equipment is dupli-
cated, with a pressure log for deep
waters and a doppler unit for re-
stricted waters. The radio station is
equipped with a Maritex unit.
initiated by the Technology Trans-
fer Division of the Scottish Develop-
ment Agency.
The division monitors licensing
opportunities abroad collated by its
own offices in the U.S. and Europe
and from British embassies and
consulates. These are computer-
matched to Scottish companies with
equivalent expertise who are look-
ing to diversify. The Kincaid/Red
Fox negotiations are one of a num-
ber of license ventures that have
been initiated by the division in the
last few months.
Konopasek & Associates
Now Reorganized As
Maritime Design, Inc.
J.L. Konopasek & Associates,
naval architects and marine engi-
neers of Jacksonville, Fla., has been
reorganized under the name Mari-
time Design, Inc.
President Jim Konopasek an-
nounced that the reorganization is
in response to market needs for
effective numerical control produc-
tion programming. He reports a
very responsive turnaround for new
design work, which he attributes to
the firm's in-house CADD system
and the ability to efficiently develop
and store composite hull designs as
well as to offer pipe and duct rout-
ing.
Maritime Design will continue
to offer marine design services to
both commercial and government
clients.
Circle 47 on Reader Service Card
Flexible welding system for numerous
welding operators...
Multiple
operator
"grids".
Low initial cost per arc... low maintenance cost... and on-site
portability are features of the multiple operator "grid" system.
It provides power for:
• SMAW (stick electrode)
• GTAW (TIG)
• ACA (air carbon arc cutting & gouging)
• Stress relieving power
GPS power sources are available in 500, 750, 1,000 and 1,500
amp models and can be paralleled. MOG grids, rated 100
percent duty cycle, come in 200, 300, 250/250, and 350/350
amp models with 50 amp coarse range increments and 5 amp fine
adjustment in each range.
A complete line of equipment lets you design and install a multiple
operator "grid" welding system to meet your particular job
requirements. Recommended for... power plant construction and
maintenance... shipbuilding and repairing... petrochemical plant
building and maintenance... fabrication shops... training facilities.
Ask for the FREE 16
page Multiple Operator
Welding Systems guide. Your
Miller Distributor is in the
Yellow Pages. Or write Miller
Electric Mfg. Co., RO. Box 1079,
Appleton, Wl 54912.
viiiIIer
, 1985 Circle 301 on Reader Service Card
April, 1985 7
Digital Wave Publishing